It’s easy to take a working washing machine for granted, so it’s concerning when you have a Whirlpool washer making loud noise when spinning. It’s normal for a washer to wear down over time and loud noises are often an easy fix.
5 Reasons Why Your Whirlpool Washer Making Loud Noise When Spinning
Don’t worry. A washer making loud noise during spin cycle isn’t difficult to diagnose. There are four things you can troubleshoot yourself before calling in the professionals. Just make sure to unplug your unit first!
Overloading the Washing Machine
When you exceed your Whirlpool washing machine’s capacity by stuffing too many clothes in it, it can have serious repercussions. The excess weight can create an imbalance within the machine, leading to loud noises and potentially damaging it over time.
In addition to this, exceeding the washer’s capacity can prevent your clothes from being cleaned thoroughly and can cause them to tear or become damaged. To avoid these issues, always follow the manufacturer’s recommended load size and avoid exceeding the washer’s capacity.
Drive Pulley Damaged
When your front-loading Whirlpool washer makes loud noise when spinning, the first thing to check is the drive pulley. You’ll find the pulley around the drive motor and its function is to make the tub in your washer spin.
After some time, the drive pulley can become worn, bent, and cracked. If you find your washer not spinning, the belt may be broken. If the drive pulley is at fault and you find your washer making loud noise during spin cycle, the pulley needs to be replaced.
Tub Bearing Defective
The second thing you should check is the tub bearing, located in the middle of the outer tub of your washer. It assists in running the inner tub smoothly and silently. Overloading your washer and using harsh detergents can cause the tub bearing to wear down over time, making your washing machine spin cycle very loud.
Unfortunately, this is a complicated part to replace so faulty tub bearing needs to be repaired by appliance experts.
Motor Coupling Failure
You’ll find a motor coupling in some top-load Whirlpool washer models. This part is connected to and designed to protect the drive motor and transmission by failing if your washer is overloaded.
If you have a Whirlpool washer makeing loud noise when spinning, it’s possible the motor coupling failed to prevent damage to the drive motor and transmission. Replacing the part will solve any noise issues with your washer.
Clutch Assembly Worn Out
The clutch assembly, which is connected to the transmission shaft, is responsible for how fast the inner tub spins. Overloading your washer can wear this part down and cause loud, scraping noises.
Since the clutch assembly affects the speed of the spin cycle, excessively wet clothes and loud noises indicate this part has worn down. Replace the part if you notice it’s showing wear and tear.
A Whirlpool washer making loud noise when spinning is worrisome but is likely caused by one of the parts mentioned above. If the repair is beyond your abilities, call Sloan Appliance Repair North Augusta for your washer repair.
